Operational Guide

Replica Sabers

(One Button)

When Blade Is Powered Off

* Wake up: Hold the button until the button light is on, then it will enter the standby mode

* Turn on: Tap the button.

* Adjust volume-3mode: Hold the button until the breath light flashes once, then release.

* Switch boot effect: Hold the button until the breath light flashes twice (or two seconds), then release.

* Switch the blade effects: Hold the button until the breath light flashes three times (or three seconds), then release.

* Switch sound fonts: Hold the button until the breath light flashes Four times (or four seconds), then release.

* Power saving mode: Hold the button until the breathing light is off or until power off sound (or when idle for 10 minutes)

‍

When Blade Is Powered On

* Blaster: Tap the button.

* Lock-up: Hold the button until the breath light flashes once, then release.

* Color change: Hold the button until the breath light flashes twice then release

* FOC off/on: Hold the button until the breath light flashes Three times, then release.

* Turn off: Hold the button until the breath light flashes Four times, then release.

‍

Gesture Operation

When Blade Is Powered Off

* Turn on: Twist the saber.

* Switch Sound fonts: when the blade is up, Hold the button, then twist the saber.

* Switch Background Music: when the blade is down, Hold the button, then twist the saber.

‍

When Blade Is Powered On

* Turn off: Twist the saber.

* Switch the blade color: when the blade is down, Hold the button, then twist the saber.

* Force: when the blade is up, Hold the button, then twist the saber.

* FOC: Hit the saber.

* Drag: Hold the button, then hit the saber.

* Melt: Hold the button, then thrust the saber.

 

 

Replica Sabers

(Two Button)

When Blade Is Powered Off

*   Turn on: Tap the PWR (Top Button).

*   Switch Sound fonts: Tap the AUX (Bottom Button). 

*   Enter volume mode: Tap the PWR and AUX simultaneously.  Then tap the PWR to increase the volume, and tap the AUX to decrease the volume. No put

*   Exit volume mode: Tap the PWR and AUX at the same time

*   Switch boot effect: Hold PWR for one second, then release. Switch blade effects: Hold AUX for one second, then release.

*   Power saving mode: No operation for 10 minutes.

*   Turn off: Click AUX three times.

‍

When Blade Is Powered On

*   Turn off: Tap PWR.

*   Blaster: Tap AUX.

*   Lock-up: Hold AUX for one second, then release.

*   FOC off/on: Tap PWR and AUX at the same time.

‍

Gesture Operation

When Blade Is Powered Off

*   Turn on: Twist the saber.

*   Switch BGM: When the blade is down, Hold AUX, then twist the saber.

*   Switch Sound Fonts: When the blade is up, Hold AUX, then twist the saber.

‍

When Blade Is Powered On

*   Turn off: Twist the saber.

*   Switch the blade color: When the blade is down, Hold AUX, then twist the saber.

*   Force: When the blade is up, Hold AUX, then twist the saber.

*   Drag: Hold PWR, then hit the saber.

*   Melt: Hold AUX, then thrust the saber.

*   Flash on Clash: Hit the saber

 

 

SWA Original Sabers

(One Button)

When Blade Is Powered Off

  • Enter standby mode: Hold the button until the button light is on.
  • Enter boot status: Click the button after entering standby mode.
  • Volume adjust: Hold the button until the breath light flashes once, then release.
  • Switch sound fonts: Hold the button until the breath light flashes twice, then release.
  • Switch blade effects: Hold the button until the breath light flashes three times, then release.
  • Power off: Hold the button until the breath light flashes five times, then release.
  • Power saving mode: Hold the button until the breathing light is off (no operation for 10 minutes).


When Blade Is Powered On

  • Blaster: Tap the button.
  • Lock-up: Hold the button until the breath light flashes once, then release.
  • Switch blade color: Hold the button until the breath light flashes twice, then release. Click the button to select color.
  • FOC off/on: Hold the button until the breath light flashes three times, then release.
  • Enter standby mode: Hold the button until the breath light flashes four times, then release.

 

SWA Original Sabers

(Two Button)

When Blade Is Powered Off

  • Enter standby mode: Hold the PWR until hearing the prompt sound "power on."
  • Enter boot status: Tap the PWR after entering standby mode.
  • Switch sound fonts: Tap the AUX.
  • Enter/Exit Volume adjust Mode: Hold the PWR and AUX at the same time until hearing the beep, then release it.
  • After Enter volume adjust Mode: Tap the PWR button to increase the volume. Tap the AUX button to decrease the volume.
  • Switch blade effects: Press and hold the AUX button for 1 second and hear the beep and release it.
  • Power off: Click AUX button 3 times.
  • Power saving mode: No operation for 10 minutes.

When Blade Is Powered On

  • Blaster: Tap the AUX.
  • Lock-up: Hold the AUX, then release.
  • Enter standby mode: Tap the PWR.

 

Gesture Operation

When Blade Is Powered Off

  • Enter boot status: Twist the saber.
  • Switch sound fonts: When the blade is up, hold the AUX button, then twist saber.
  • Switch BGM: When the blade is down, hold the AUX button, then twist saber.

When Blade Is Powered On

  • Switch blade color: When the blade is down, hold the AUX button, then twist saber.
  • FOC: Hit the saber.
  • Enter standby mode: Twist the saber.